CONDOR™ pro/4 Scan
(230 VAC/115 VAC)
| METROL | |||
| LED Driver | |||
| Number of mid current LEDs | 16 x 150 mA | ||
| Number of high current LEDs | 4 x 1000 mA | ||
| Total LED power | 20 W | ||
| Individual dimming control | 12 Bit PWM | ||
| Secondary Axes | |||
| Drive power | 2 A / 24 V | ||
| Motor Types | DC-Brush / Brushless / Stepper | ||
| Digital servo drives | 96 kHz PWM | ||
| Number of secundary axes | 2 | ||
| Feedback | Encoder / Tachometer / Hall | ||
| Physical Data | |||
| Rack mounting | 19" | ||
| Weight | 20 kg | ||
| Dimensions (W x D x H) | 490 x 135 x 380 mm | ||
| Electrical Data | |||
| Nominal input power | 550 VA | ||
| Input voltage | 230 VAC (Art.no. 35013) 115 VAC (Art.no. 35014) | ||
| Main Axis | |||
| Servo loop time | 83 µs | ||
| Drive power | 5 A / 60 V | ||
| Input frequency (digital scale) | up to 15 MHz | ||
| Digital scale input RS422 | ✓ | ||
| Number of main axis | 4 | ||
| Analog scale input | by external interface | ||
| Feedback | Encoder/Tachometer | ||
| Motor Types | DC-Brush | ||
| Digital servo drives | up to 96 kHz PWM | ||
| Subcount interpolation | ✓ | ||
| General Specifications | |||
| SP600 interface | ✓ | ||
| Number of CMM axes controlled | 4+2 | ||
| SP80 interface | ✓ | ||
| TP200 interface | ✓ | ||
| SP25M interface | ✓ | ||
| Software integration | EAGLE.driver | ||
| Communications link with PC | Ethernet and RS232 | ||
| TP20 interface | ✓ | ||
| Ethernet communication rate | 100 Mbit/s | ||
| Pantec Support Tool | ✓ | ||
| Emergency stop DIN EN 13849 | ✓, extended | ||
| Measurement volume | Unlimited | ||
| GEC (Geometric Error Compensation) | ✓ | ||
| Touch-trigger probing function | ✓ | ||
| Temperature sensor inputs (T-Bus™) | 16 | ||
| Integrated motor power supply | ✓ | ||
| Configured for direct CNC controlled CMMs | ✓ | ||
| Configurable additional axis | ✓ | ||
